400HD Series IP Phones
Administrator's Manual 58 Document #: LTRT-11950
For security, communication between the IP phone and the HTTPS Redirect server is
encrypted (HTTPS) and uses the pre-installed AudioCodes factory-set certificate (see
Section 32) to authenticate itself with the HTTPS Redirect server and to verify authenticity of
the latter. If the redirect URL (where the configuration file is stored) also uses the HTTPS
protocol, the IP phone can use a regular certificate or the AudioCodes factory-set certificate
to authenticate itself and to validate the server’s certificate if a trusted root certificate
(regular) is configured.
Note: The IP phone repeats the redirect process whenever it undergoes a reset to factory
defaults.
10.3 Static URL Provisioning
This section shows how to configure the phone using the Static URL method.
To configure static provisioning information using the Web interface:
1. Access the Automatic Provisioning page (Management tab > Automatic Update menu
> Automatic Provisioning).
Figure 10-5: Web Interface - Automatic Provisioning – Static URL
2. Configure the parameters using the table below as reference, and then click Submit.
To Next Page
Loading...
