Administrator's Manual 10. Obtaining Firmware and Configuration Files
Version 2.2.8 59 400HD Series IP Phones
To configure static provisioning information using the Configuration File:
• Use the table below as reference.
Table 10-3: Static URL Automatic Provisioning Parameters
Parameter Description
Provisioning Method
[provisioning/method]
Defines the provisioning method:
[Disable] Disable - Automatic update is disabled. The
phone attempts to upgrade its firmware and configuration
[Dynamic] DHCP Options (Dynamic URL) (default) - Using
DHCP Option 160 and Options 66/67 for provisioning
Static URL - Using Static URL for provisioning
Firmware URL
[provisioning/firmware/url]
The static URL for checking the firmware file. The URL must be
entered using one of the following syntax options:
<protocol>://<server IP address or host name>
<protocol>://<server IP address or host name>/<firmware
file name>
Where<protocol> can be one of the following protocols: ftp,
tftp, http or https. For example:
tftp://192.168.2.1 – retrieved firmware file is440HD.img
ftp://192.168.2.1/Different_Firmware_Name.img - retrieved
firmware file is Different_Firmware_Name.img
Note: This parameter is applicable only when 'method' is
configured to Static.
Configuration URL
[provisioning/configuration/url]
The static URL for checking the configuration file. The URL
must be entered using one of the following syntax options:
<protocol>://<server IP address or host name>
<protocol>://<server IP address or host
name>/<configuration file name>
Where<protocol> can be one of the following protocols: "ftp",
"tftp", "http" or "https". For example:
http://192.168.2.1 - configuration file name is <MAC
Address>.cfg, for example, 001122334455.cfg
https://192.168.2.1/440HD_<MAC>_conf.cfg - retrieved
configuration file name is 440HD_<MAC
Address>_conf.cfg, for example,
440HD_001122334455_conf.cfg
Note: This parameter is applicable only when 'method' is
configured to Static.
To Next Page
Loading...
