AudioCodes 420HD - Configuring Silence Compression; Figure 21-2: Web Interface - Voice - Silence Compression; Table 21-2: Silence Compression Parameters

400HD Series IP Phones
Administrator's Manual 132 Document #: LTRT-11950
21.3 Configuring Silence Compression
The Silence Compression feature can be configured using the Web interface or
Configuration File.
 To configure Silence Compression using the Web interface:
1. Access the Voice page (Configuration tab > Voice Over IP menu > Voice) and
then scroll down to Silence Compression.
Figure 21-2: Web Interface - Voice - Silence Compression
2. Configure the parameter using the table below as reference, and then click
Submit.
 To configure Silence Compression using the Configuration File:
• Use the table below as reference.
Table 21-2: Silence Compression Parameters
Parameter Description
Enable Silence Compression
[voip/audio/silence_compression/enabled]
Enables silence compression for reducing network
bandwidth consumption.
 [0] Disable (default)

[1]
Enable