Administrator's Manual 26. Configuring Keys
Version 2.2.8 177 400HD Series IP Phones
26 Configuring Keys
This section shows how to configure keys.
The following keys can be configured:
Function Keys (see Section 26.1) – applies to the 430HD and 440HD phones
Programmable Keys (see Section 26.2) - applies to the 430HD and 440HD phones
Speed Dials (see Section 26.3) – applies to the 420HD and 405 phones
Softkeys (see Section 26.3.2) – applies to the 420HD and 405 phones
Navigation Keys (see Section 26.5) – applies to all phones
26.1 Configuring Function Keys
This section shows how to configure Function Keys.
Note: Applies only to the 430HD and 440HD phone models.
26.1.1 430HD Phone
Up to 12 Function Keys can be configured as Speed Dials+BLFs and for Multicast Paging
(for configuring Multicast Paging, see Section 27). On the phone, the 12 Function Keys are
located on the right side. The label panes, next to the BLFs, are covered. You can use the
Web interface or Configuration File to configure Function Keys.
To configure a Function Key as a Speed Dial using the Web interface:
1. In the Web interface, open the Function Keys page (Configuration tab > Personal
Settings > Function Keys).
Figure 26-1: 430HD Phone Web Interface – Personal Settings - Function Keys
To Next Page
Loading...
