Administrator's Manual 10. Obtaining Firmware and Configuration Files
Version 2.2.8 57 400HD Series IP Phones
10.2.7 Redirect Server
You can use the AudioCodes Redirect server to direct you to the appropriate Provisioning
server URL to download the relevant configuration and firmware files.
Once the IP phone is powered up and network connectivity is established, it automatically
request for provisioning information. In case it does not obtain these files according to the
regular provisioning hunt order methods (see Section 10.1), it sends an HTTPS request to
the AudioCodes HTTPS Redirect server. The server responds to the IP phone with an
HTTPS Redirect response containing the URL of the Provisioning server where the firmware
and configuration files are located. Once the IP phone has successfully connected to the
Provisioning server URL, the Automatic Update mechanism can commence.
Note:
• The MAC addresses of the IP phones and the Provisioning server's URL are
pre-configured on the HTTPS Redirect server. For more information, contact
AudioCodes support.
• The default URL of the Redirect server is:
provisioning/redirect_server_url=https://redirect.audiocodes.com
This address can be reconfigured if required.
Figure 10-4: Redirect Server Configuration Process
1. Device sends HTTPS request to AudioCodes HTTPS Redirect server.
2. Redirect server sends HTTPS response with redirect URL of the Provisioning server.
3. IP phone sends request to redirected URL (i.e., Provisioning server).
To Next Page
Loading...
