Administrator's Manual 26. Configuring Keys
Version 2.2.8 191 400HD Series IP Phones
26.5.1 Saving Configured Keys
Note: This section applies to all phone models.
After configuring softkeys, the configuration can be saved in a cfg file on a computer and then
loaded to other phones.
To save the configured softkeys in a cfg file:
1. Access the Programmable Keys page (Configuration tab > Personal Settings
menu > Programmable Keys) and locate the Load and Save section.
Figure 26-7: Web Interface – Load and Save
2. Click Save Programmable Keys; the configured keys are saved in a cfg file.
26.5.2 Loading Saved Keys to Phones
Note: This section applies to all phone models.
After configuring softkeys, the configuration can be saved in a cfg file on a computer and then
loaded to other phones.
To load the saved keys to other phones:
1. Access the Programmable Keys page (Configuration tab > Personal Settings
menu > Programmable Keys).
2. Click Browse…. to select the cfg file.
3. Click Open; the selected cfg filename and path appear on the Web interface
alongside the Browse… button.
4. Click Load Programmable Key; the file is uploaded to the phone.
To Next Page
Loading...
