AudioCodes 420HD - Configuring Speed Dials; 420 HD and 405 Phone Models; Figure 26-4: Web Interface - Personal Settings - Speed Dials (420 HD and 405 Phone Models)

Administrator's Manual 26. Configuring Keys
Version 2.2.8 183 400HD Series IP Phones
26.3 Configuring Speed Dials
Note: This section applies to the 420HD and 405HD phone models.
26.3.1 420HD and 405 Phone Models
Up to nine dialpad keys can be configured as Speed Dials. You can configure them in the
Web interface or using the Configuration File.
 To configure a dialpad key as a Speed Dial in the Web interface:
1. In the Web interface, open the Function Keys page (Configuration tab > Personal
Settings > Function Keys).
Figure 26-4: Web Interface – Personal Settings – Speed Dials (420HD and 405 Phone Models)
2. In the 'Number' field, enter the phone number to which to assign the Speed Dial.
Keys 1-9 correspond to the 1-9 keys on the device's dial pad.
3. After configuring a Speed Dial, click Submit for the setting to take effect on the phone.
4. Alternatively, you can use the Save Function Keys button to save the configuration in a
file, which you can then browse to and load to the phone using the Load Function Keys
button.
5. You can select one or more configured Speed Dials under the 'Delete' column, and then
click the Delete All button.