AudioCodes 420HD - Configuring EAP TLS Mode; Figure 32-2: Web Interface -801.1 X Settings - EAP-TLS

Administrator's Manual 32.Configuring 802.1x
Version 2.2.8 215 400HD Series IP Phones
 To configure 802.1x settings for EAP-MD5 using the configuration file:
• Use the table below as reference.
Table 32-1: EAP MD5 Parameters
Parameter Description
EAP Type
[/network/lan/_802_1x/eap_type]
Sets 802.1x Extensible Authentication Protocol mode:
 [Disable] = Disables the use of 802.1x
 [EAP_MD5]=Authentication is implemented by user
name and password (Password is optional).
 [EAP_TLS]= Authentication is implemented by
Certificate, Client Certificate and Client Private Key.
Identity
[/network/lan/_802_1x/md5_identity]
User ID for md5 mode.
MD5 password
[/network/lan/_802_1x/md5_password]
Password for md5 mode. (Leave blank if no password).
32.2.2 Configuring EAP TLS Mode
This section shows how to configure the phone's 802.1x settings for EAP-TLS using the Web
interface or configuration file.
 To configure 802.1x settings for EAP-TLS using the Web interface:
1. Access the 802.1X Settings page (Configuration > Network Settings > 802.1X
Settings) and select TLS as 'EAP Type'.
Figure 32-2: Web Interface –801.1X Settings - EAP-TLS
2. Click Submit.