400HD Series IP Phones
Administrator's Manual 156 Document #: LTRT-11950
23.20 Creating a Speed Dial File for Configuration File
The configuration file can include a link to a user-defined Speed Dial file, using the
provisioning/speed_dial_uri parameter. This allows you to upload speed dial settings to
the phone.
The Speed Dial file must include a list of speed dial configurations. The file must be a
simple text file that can be created using an Excel document and saved as a CSV file.
The syntax of the speed dial file is as follows:
<memory key>,<speed dial phone number>,<type>
where:
<memory key> is the speed dial memory key on the phone.
<speed dial phone number> is the phone number that is automatically dialed,
when the user presses the speed dial key.
<type> denotes the Speed Dial feature and must be set to “0”.
Below is an example of a Speed Dial file:
1,4418,0
2,4403,0
3,039764432,0
4,4391,0
12,1234,0
To Next Page
Loading...
