AudioCodes 420HD - Deleting Speed Dials; Saving Configured Speed Dials

400HD Series IP Phones
Administrator's Manual 184 Document #: LTRT-11950
 To configure a key as a Speed Dial using the configuration file:

Open the Configuration File page (Management tab > Manual Update >
Configuration File) and locate the Function Key parameters. Use the table below as
reference when configuring the parameters.
Table 26-6: Speed Dials Parameters
Parameter Name Description
[personal_settings/functional_key/0-8/speed_dial_extension]
Used to define a label for a Speed Dial.
[personal_settings/functional_key/0/speed_dial_number]
The telephone number which the speed dial
dials. The speed-dial feature helps users quickly
dial numbers that are frequently used or that are
hard to remember.
[personal_settings/functional_key/0/type=SPEED_DIAL]
The feature helps users quickly dial numbers
that are often used or that are hard to
remember.
26.3.2 Deleting Speed Dials
You can delete configured Speed Dials.
 To delete Speed Dials:
• Check the 'Delete' box corresponding to the Speed Dial that you want to delete,
and then click Submit
-or-
• Click the Delete All button, and then at the prompt, click OK
 To clear (unselect) all selected 'Delete' check boxes:
• Click the Reset button.
26.3.3 Saving Configured Speed Dials
After configuring Speed Dials in the Web interface, you can save the configuration in a cfg file
on your computer and then load it to other phones.
 To save Speed Dials in a cfg file:
1. Access the Function Keys page (Configuration tab > Personal Settings menu >
Function Keys).
2. Click Save Function Keys; the configuration is saved in a .cfg file.