AudioCodes 420HD - Configuring a Key Event

400HD Series IP Phones
Administrator's Manual 182 Document #: LTRT-11950
26.2.1.2 Configuring a Key Event
You can set as Key Events the six keys flanking the LCD, as well as sidecar key 13 and up.
 To configure a Key Event:
1. Enable the key_event parameter:
• Set personal_settings/functional_key/12/type to KEY_EVENT
(Default = SIP_ACCOUNT)
• Set personal_settings/functional_key/13-17/type to KEY_EVENT
(Default = empty)
Note:
• personal_settings/functional_key/12/type = the uppermost left key flanking the LCD
• personal_settings/functional_key/13-17/type = the other five keys flanking the LCD
2. Set voip/line_key/0/key_event to the event you require - use the table below as
reference.
Table 26-5: Configuring a Key Event
Parameter Name Description
[voip/line_key/0-5/key_event]
Defines an event to allocate to each of the six keys flanking the
LCD.
Only becomes operative if the type parameter is set to
KEY_EVENT as shown above.
Default: MISSED_CALLS.
You can change the default to:
 DIALED_CALLS
 RECEIVED_CALLS
 FORWARD_ALL

DND