EasyManua.ls Logo

AudioCodes 420HD - Page 172

AudioCodes 420HD
336 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
400HD Series IP Phones
Administrator's Manual 172 Document #: LTRT-11950
Parameter Name Description
Port
[system/ldap/port]
Defines the LDAP service port.
User Name
[system/ldap/user_name]
Defines the user name used for the LDAP search
request.
Password
[system/ldap/password]
Defines the password of the search requester.
Base
[system/ldap/base]
Defines the access point on the LDAP tree.
Name Filter
[system/ldap/name_filter]
Specifies your search pattern for name look ups.
For example:
When you type in the following
field: (&(telephoneNumber=*)(sn=%)), the search
result includes all LDAP records, which have the
'telephoneNumber' field set and the
'(“sn”-->surname)' field starting with the entered
prefix.
When you type in the following field:
(|(cn=%)(sn=%)), the search result includes all
LDAP records which have the
'(“cn”-->CommonName)' OR '(“sn”-->Surname)'
field starting with the entered prefix.
When you type in the following field: (!(cn=%)), the
search result includes all LDAP records which “do
not” have the “cn” field starting with the entered
prefix.
Name Attribute
[system/ldap/name_attrs]
Specifies the LDAP name attributes setting, which
can be used to specify the “name” attributes of
each record which is returned in the LDAP search
results.
When you type in the following field, for example,
cn sn displayName”, this requires you to specify
'cn-->commonName'. This is the Full name of the
user, sn-->Surname, last name or family name
and “displayName” fields for each LDAP record.
Number Filter
[system/ldap/number_filter]
Specifies your search pattern for number look ups.
When you type in the following field, for example,
(|(telephoneNumber=%)(Mobile=%)(ipPhone=%))
, the search result is all LDAP records which have
the “telephoneNumber” OR “Mobile” OR
“ipPhone”field match the number being searched.
When you type in the following field:
(&(telephoneNumber=%)(sn=*)), the search result
is all LDAP records which have the “sn” field set
and the “telephoneNumber” match the number
being searched.

Table of Contents

Other manuals for AudioCodes 420HD

Related product manuals