AudioCodes 420HD - Page 264

400HD Series IP Phones
Administrator's Manual 264 Document #: LTRT-11950
Parameter Description
Enable RTP Recording
[voip/packet_recording/rtp_recording/enabled]
Only displayed if the parameter 'Enable
DSP Recording' is enabled.
Activates the DSP RTP recording.
 [0] Disable (default)
 [1] Enable
Enable EC Debug Recording
[voip/packet_recording/ec_debug_recording/enabled]
Activates the Echo Canceller Debug
recording.
 [0] Disable (default)

[1]
Enable
Enable Noise Reduction Debug Recording Traffic on the network stops when the
MUTE key is activated.
 [0] Disable (default)

[1]
Enable
Enable Network Recording
[voip/packet_recording/network_recording/enabled]
Activates the DSP network (TDM Out)
recording.
 [0] Disable (default)
 [1] Enable
Enable TDM Recording
[voip/packet_recording/tdm_recording/enabled]
Activates the DSP TDM (TDM In)
recording.
 [0] Disable (default)
 [1] Enable
[voip/packet_recording/cng_debug_recording/enabled]
Default=0