AudioCodes 420HD - Pairing the BToE PC Application with the IP Phone; Generating a Pair Code

Administrator's Manual 13. Configuring Date and Time Manually
Version 2.2.8 71 400HD Series IP Phones
Parameter Description
Start Time
[system/daylight_saving/start_date]
This subsection defines the starting day for the
daylight saving offset.
 [month] - defines specific month in year
 [day] - defines specific day in month
 [hour] - defines specific hour in day
 [minute] - defines specific minute in hour
Example: To configure the phone to start daylight
savings with a specific offset on February 22
nd
at
14:30, set the following:
system/daylight_saving/start_date/month=2
system/daylight_saving/start_date/day=22
system/daylight_saving/start_date/hour=14
system/daylight_saving/start_date/minute=30
Start Time
[system/daylight_saving/start_date/month]
The month in a year.
The valid range is 1 to 12.
Start Time
[system/daylight_saving/start_date/day]
The day in a month.
The valid range is 1 to 31.
Start Time
[system/daylight_saving/start_date/hour]
The hour in the day.
The valid range is 0 to 23.
Start Time
[system/daylight_saving/start_date/minute]
The minute in an hour.
The valid range is 0 to 59.
End Time
[system/daylight_saving/end_date]
This subsection defines the ending day for the
daylight saving offset.
 [month] - defines the specific month in a year
 [day] - defines the specific day in a month
 [hour] - defines the specific hour in a day
 [minute] - defines the specific minute in an
hour
For example: To configure the phone to end the
daylight savings on July 16
th
at 22:15, set the
following:
system/ntp/daylight_saving/end_date/month=7
system/ntp/daylight_saving/end_date/day=16
system/ntp/daylight_saving/end_date/hour=22
system/ntp/daylight_saving/end_date/minute=15
End Time
[system/daylight_saving/end_date/month]
The month in a year.
The valid range is 1 to 12.
End Time
[system/daylight_saving/end_date/day]
The day in a month.
The valid range is 1 to 31.
End Time
[system/daylight_saving/end_date/hour]
The hour in the day
The valid range is 0 to 23.
End Time
[system/daylight_saving/end_date/minute]
The minute in an hour.
The valid range is 0 to 59.