AutomationDirect CLICK Series User Manual

Accessories (cont’d)
C0-8TB – Spare 8 Point I/O
Terminal Block
Replacement terminal block for the 8
point I/O modules. Sold in packs of 2.
C0-8TB-1 – Spare 8 Point I/O
Terminal Block
Replacement terminal block for the 8
point relay I/O modules. Sold in packs
of 2.
C0-16TB – Spare 16 Point I/O
Terminal Block
Replacement terminal block for the
16 point I/O modules & PLC built-in
I/O. Sold in packs of 2.
C0-3TB - Spare 3-Pole
Terminal Block
Replacement 3-pole terminal block for
the 3-wire, RS485 communications port
on the CLICK Standard and Analog
PLCs. Sold in packs of 2.
C0-4TB – Spare 24VDC Power
Terminal Block
Replacement terminal block for the
24VDC supply power to the PLC. Sold
in packs of 2.
ZIPLink Wiring Systems
C-more and C-more Micro-Graphic
Operator Interfaces
DN-WS – Wire Stripper
TW-SD-MSL-2 – Insulated
Slotted
Screwdriver 0.4 x 2.5 x 80 mm
DN-EB35MN – DINnectors
End Bracket
D2-BAT-1 – Battery
Replacement battery for Standard,
Analog, and Ethernet PLC units.
CLICK PLC Hardware User Manual, 6th Edition, Rev. G – C0-USER-M
2–150
Chapter 2: Specifications

AutomationDirect CLICK Series Specifications

General

Brand	AutomationDirect
Model	CLICK Series
Category	Controller
Language	English