Introduction
Purpose of this Manual
Thank you for purchasing the AutomationDirect CLICK PLC family of products. This
hardware user manual provides information that will help you install, set up, program,
troubleshoot, and maintain your CLICK PLC system. The manual includes information that
is critical to the safety of the personnel who will install and use the PLC, and to the machinery,
processes, and equipment controlled by the PLC.
The manual also includes important information about power and signal wiring, mounting of
the PLC, and configuring the PLC system.
About Getting Started
If you are familiar with PLCs in general, then following the simple steps in this first chapter
may be all you require to start being productive using a CLICK PLC system. After you have
completed the steps, your CLICK PLC will be running the ladder logic project that you
programmed. If you are new to the world of PLCs, be sure to read through all of the chapters
in this hardware user manual.
Supplemental Manuals and Other Help
The CLICK Programming Software, C0-PGMSW, can be downloaded free from the
AutomationDirect web site (link shown below under Technical Support). Both this Hardware
User Manual, C0-USER-M, and the Software Installation Guide are free as a download. The
CLICK Programming Software includes searchable online help topics covering all aspects of
the software and instruction set.
Technical Support
We strive to make our manuals the best in the industry. We rely on your feedback to let us
know if we are reaching our goal. If you cannot find the solution to your particular application,
or, if for any reason you need technical assistance, please call us at:
770–844–4200
Our technical support group will work with you to answer your questions. They are available
Monday through Friday from 9:00 A.M. to 6:00 P.M. Eastern Time. We also encourage you
to visit our web site where you can find technical and non-technical information about our
products and our company.
http://www.automationdirect.com
CLICK PLC Hardware User Manual, 6th Edition, Rev. G – C0-USER-M
1–2
Chapter 1: Getting Started
To Next Page
Loading...
Need help?
General
