AutomationDirect CLICK Series User Manual

Step 1: Install Programming Software
1. If you have the programming software on CD, insert the CD in the computer drive
and follow the instructions. Otherwise, download the free CLICK Programming
Software, C0-PGMSW, from the following Automationdirect.com web site:
http://support.automationdirect.com/products/clickplcs.html
2. Unzip the downloaded ZIP file.
3. Double click Install.exe. The CLICK PLC Programming
Software splash screen should appear after a short time.
4. Click on the splash screen’s Install Software button and follow the dialog boxes.
5. If you intend to communicate via USB ports on your personal computer using cable
EA-MG-PGM-CBL, click on the Install USB Drive button. Follow the dialog boxes.
You can install the USB driver either before or after the software is installed.
NOTE: For additional details, see the CLICK
Software Installation Guide, C0-PGMSW-SIG,
included in the ZIP file. (file name: Click_
software_installation.pdf)
Install USB Driver Button
CLICK PLC Hardware User Manual, 6th Edition, Rev. G – C0-USER-M
1–5
Chapter 1: Getting Started

AutomationDirect CLICK Series Specifications

General

Brand	AutomationDirect
Model	CLICK Series
Category	Controller
Language	English