10-12 BE1-951 Human-Machine Interface 9328900990 Rev L
4. Press the Edit pushbutton to enter the password. If the proper password has been entered, the
screen will flash ACCESS GRANTED. If an incorrect password has been entered, the screen will
flash ACCESS DENIED and the EDIT LED will go out.
5. Once you gain access, it remains in affect for five minutes after the last pushbutton has been
pressed. As long as you continue to press the Edit key for a function for which you have gained
access, the five-minute timer will be refreshed and you will not be prompted for a password.
To Next Page
Loading...