9328900990 Rev L BE1-951 BESTCOMS Software 14-37
BESTPRINT
BESTPrint, which is found on the CD included with the BE1-951 relay, will preview and print Basler
Electric relay settings files. This is via graphic representations similar to what is seen in the BESTCOMS
software application. BESTPrint will only read the settings files and document the information. It will not
write or change any settings in the settings file (*.bst) at this time.
Profile files for each device are needed to print documentation for that particular device. New and
updated profiles will be available from Basler Electric. One new set of profiles and their support files will
be the optimum way to acquire additional printing of more devices or updated settings files.
For additional information, see the Help files in the BESTPrint application.
To Next Page
Loading...
Need help?
General