EasyManua.ls Logo

Basler BE1-951 - CE Qualified; CSA Certification; DNP Certification; Electrostatic Discharge (ESD)

Basler BE1-951
505 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9328900990 Rev L BE1-951 General Information 1-17
Electrostatic Discharge (ESD)
Four kilovolts contact discharges and 8 kilovolts
air discharges applied in accordance with
Qualification EN61000-4-2.
CE Qualified
This product meets or exceeds the standards
required for distribution in the European
Community.
UL Recognition
UL recognized per Standard 508, UL File Number
E97033. Note: Output contacts are not UL
recognized for voltages greater than 250 V.
CSA Certification
CSA certified per Standard CAN/CSA-C22.2
Number 14-M91, CSA File Number LR23131-
140s. Note: Output contacts are not CSA certified
for voltages greater than 250 V.
GOST-R Certification
GOST-R certified No. POCC US.ME05.B03391; is
in compliance with the relevant standards of
Gosstandart of Russia. Issued by accredited
certification body POCC RU.0001.11ME05.
DNP Certification
DNP 3.0 IED certified, Subset Level 2, 06/20/00,
by SUBNET Solutions, Inc.
Environment
Operating Temperature Range: -40°C to 70°C (-40°F to 158°F)
Storage Temperature Range: -40°C to 70°C (-40°F to 158°F)
Humidity Qualified to IEC 68-2-38, 1st Edition 1974, Basic
Environmental Test Procedures, Part 2: Test
Z/AD: Composite Temperature Humidity Cyclic
Test
Display is inoperative below -20°C
Shock
Qualified to IEC 255-21-2, Class 1
Vibration
Qualified to IEC 255-21-1, Class 1
Weight
H1: Approximately 10 pounds (4.54 kg)
S1: Approximately 11.2 pounds (5.08 kg)
S1 Double-ended: Approximately 12.8 pounds (5.81 kg)
Case Sizes
H1, S1 & S1 Double-ended: See Section 12, Installation, for case dimensions
and
Figure 1-1, Style Chart, for available options.

Table of Contents