1
Press [Fax Number] [Details].
2
Set the items, and press [Apply].
[ECM TX] *1
When an error occurs for an image being sent, the machine corrects the image so as not to send a
distorted image.
[TX Speed] *1
If it takes time to start sending a fax, such as when there is a poor phone line connection, the machine
lowers the communication start speed.
[Long Distance]
If a communication error occurs when sending a fax to an international destination, select [International
(1)]. If the error does not improve, select [International (2)] and [International (3)] in that order.
*1
If this is not set here, the settings that appear when selecting [Menu] in the [Home] screen and then selecting
[Function Settings] are applied.
[ECM TX](P. 436)
[TX Start Speed](P. 438)
3
Press [Apply].
6
Press [Apply].
➠ The destination is r
egistered to the Address Book.
Registering a Destination from the TX Job Log of a Fax Job
● In addition to calling up the TX Job Log fr
om the Address Book, you can also register destinations from the
TX Job Log of a fax job to the Address Book.
Checking the Status and Log for Sent and Received Faxes(P. 243)
Basic Operations
153
To Next Page
Loading...
