6
Set the destination information.
You can register a destination without entering its name, but by entering the name, you can search for it by
its initials when specifying the destination.
1
Enter the name and fax number.
2
Set the fax sending details, as needed.
If a send err
or occurs or it takes time to send a fax to a registered fax number, set the fax sending details.
[ECM TX] *1
When this is selected and an error occurs for an image being sent, the machine corrects the image so as
not to send a distorted image.
[Speed] *1
If it takes time to start sending a fax, such as when there is a poor phone line connection, the machine
lowers the communication start speed.
[Long Distance]
If a communication error occurs when sending a fax to an international destination, select [International
(1)]. If the error does not improve, select [International (2)] and [International (3)] in that order.
*1
If this is not set here, the setting in [Settings/Registration]
[TX Settings] [Fax TX Settings] is applied.
[ECM TX](P. 436)
[TX Start Speed](P. 438)
7
Click [OK].
➠ The destination is r
egistered to the Address Book.
8
Log out from Remote UI.
Editing or Deleting Registered Destinations
● You can edit the registered information by clicking the destination you want to edit in the screen in Step 4.
● In Step 4, click [Delete] to the right of the destination you want to delete, and the destination will be deleted.
Basic Operations
158
To Next Page
Loading...
