4
Congure the other cop
y settings, as needed.
Additional Copying Features (Touch
Panel Model)(P
. 251)
You can perform 2-sided copying and adjust the image quality and other settings to suit your original and
purpose.
5
Press
.
➠ Cop
ying starts.
● To cancel copying, press [Cancel]
[Yes]. Canceling Copy Operations(P. 275)
● Use [Status Monitor] to vie
w the copy job status.
Viewing the Print Job Status and Log(P. 198)
When [Scan Next] appears
When an original is placed on the platen glass and copied using 2-sided cop
ying, N on1 or collate, the screen
is displayed for scanning the next original.
1
Select the original size.
Only displayed when 2-sided cop
ying is specied.
2
Place the next original on the platen glass, and press
.
➠ The ne
xt original is scanned, and the same screen is displayed.
Repeat this process until scanning of all originals is completed.
● You can also press [Density]to change the settings for each original.
● If the size of the original is different, part of the image may be missing, or the image may be printed
smaller on the paper.
3
Press [Start Copy].
➠ The scanned originals are printed.
Copying
248
To Next Page
Loading...
