➠ The back of the ID car
d is scanned and copying starts.
● To cancel copying, press [Cancel]
[Yes]. Canceling Copy Operations(P. 275)
● Use [Status Monitor] to vie
w the copy job status.
Viewing the Print Job Status and Log(P. 198)
Copying ID Cards (5 Lines LCD Model)
1
On the operation panel, press
. Operation Panel(P. 13)
➠ The cop
y screen is displayed.
2
Set the number of copies.
Press / [Number of Copies] set the number of copies , or use the numeric keys to
enter the number of copies.
3
Adjust the density and image quality, as needed.
Adjusting the Density(P. 254)
Adjusting the Image Quality(P. 255)
* When you make copies using the ID Card Copy function, the copy ratio is xed at 100%.
4
Press .
➠ The fr
ont of the ID card is scanned.
5
When [Scan Next] is displayed, turn over the ID card and place it on the platen glass.
Place the back of the ID card face down in the same way as the front.
6
Press
.
Copying
269
To Next Page
Loading...
