Canon imageCLASS MF273dw - Page 391

You can change the units displayed such as for the paper weight.
* [Gr
am/Pound Switch] is only displayed when [Select Country/Region] is set to [United States (US)] or [Canada (CA)].
[Gram]
[Pound]
[Displ. Timing for Cartridge Prep. Notif.]
[Menu] [Preferences] [Display Settings]
When the toner in a toner cartridge runs lo
w, a message appears notifying you to prepare a new toner cartridge. To
manually specify when this message appears (the toner level in a cartridge), specify the timing in [Custom].
When [Auto] is enabled, the machine automatically decides when to display the message.
[Auto]
[Custom]
20 to 99 (%) (T
ouch Panel Model)
2 to 20 to 99 (%) (5 Lines LCD Model)
[Show Warnings]
[Menu] [Preferences] [Display Settings]
Specify whether a notication message is displayed when a toner cartridge is lo
w on toner.
* If the machine is congured to stop printing when a toner cartridge is low on toner, this cannot be set to [Off].
[Action When Warning](P. 382)
* If the machine is congur
ed not to print incoming faxes when a toner cartridge is low on toner, the message
appears even when this is set to [Off].
[Continue Print. When Amount in Cart. Low](P. 442)
[Low Cartridge Level]
[Off]
[On]
[Action When Warning]
[Menu] [Preferences] [Display Settings]
Specify whether to continue printing when a toner cartridge is lo
w on toner.
If this is set to [Stop Printing], a notication message appears when the toner cartridge runs low on toner.
[Show
W
arnings](P. 382)
[Low Cartridge Level]
[Continue Printing]
[Stop Printing]
[Display IP Address]
[Menu] [Preferences] [Display Settings]
Specify whether to display the machine
’s IPv4 address in the [Status Monitor] screen.
[Status Monitor]
Scr
een(P. 116)
Settings Menu Items
382