Canon imageCLASS MF273dw - Page 394

[Date Format]
[Menu] [Preferences] [Timer/Energy Settings]
Set the or
der in which the year, month, and day are displayed.
* Depending on your country or region, the [Date Format] setting may not be available, or its content or default
setting may be different.
[YYYY MM/DD]
[MM/DD/YYYY]
[DD/MM YYYY]
[Time Format]
[Menu] [Preferences] [Timer/Energy Settings]
Set 12 Hour or 24 Hour as the format for displayed time.
[12 Hour (AM/PM)]
[24 Hour]
[Auto Reset Time]
[Menu] [Preferences] [Timer/Energy Settings]
If the oper
ation panel is not used for a set period, a function called "Auto Reset Time" automatically restores the
default settings. This setting species whether Auto Reset is invoked.
If you enable Auto Reset, you can then set the time after which it is triggered.
* You can also change the screen that is displayed after an Auto Reset.
[Function After Auto Reset](P. 385)
0 (Off)
1 to 2 to 9 (min.)
Situations Where Auto Reset is Not Triggered
● When the Err
or lamp on the operation panel is ashing
Operation Panel(P. 13)
● When the [Menu] scr
een or an error message
*1
is displayed on the operation panel
● When processing of some sort (such as printing or sending and receiving faxes) is in progress
*1
Auto Reset is performed for some messages.
[Function After Auto Reset]
[Menu] [Preferences] [Timer/Energy Settings]
Set the screen displayed after an Auto Reset.
● T
o view the specied screen, specify the screen in [Default Function]. Specify the displayed screen in [Default
Screen After Startup/Restoration].
[Default Screen after Startup/Restoration](P. 380)
Settings Menu Items
385