Canon imageCLASS MF273dw - Page 57

Set the time zone (UTC
*1
) and Daylight Saving Time according to the region where this machine is installed.
*1 The UTC (Coordinated Universal Time) is a coordinated universal time that is standard for all parts of the
world. Internet-based communication relies on the UTC being set correctly.
2
On the [Current Time Set.] screen, enter the date and time, and press
.
➠ The time and date ar
e set, and the Remote UI conrmation screen is displayed.
Step 3: Setting Remote UI
With Remote UI, you can use a Web browser on a computer to check the operation status of the machine, change the
settings, and perform other operations.
Set the System Manager ID and Remote UI Access PIN to prevent unauthorized access to the machine.
1
On the Remote UI conrmation scr
een, select [<Yes>] and press
.
To set the Remote UI Access PIN at a later time, select [<No>] and proceed to "Step 4: Connecting to a
Wir
eless LAN."
Step 4: Connecting to a Wireless LAN(P. 48)
2
Conrm the message
press conrm the message select [Yes] press .
➠ The [Remote UI Access PIN] scr
een is displayed.
Restrict the use of Remote UI to only those users who know the Remote UI Access PIN.
3
Enter the Remote UI Access PIN
select [<Apply>] press .
Specify any number. You cannot set a PIN consisting of all zeros, such as "00" or "0000000."
4
Enter the PIN again select [<Apply>] press .
➠ After the message [Settings congur
ed.] appears, the screen for conrming the wireless LAN connection is
displayed.
Step 4: Connecting to a Wireless LAN
Connect to the network using wireless local area network (LAN).
1
On the screen for conrming the wir
eless LAN connection, select [Yes] and press
.
● If the machine is not connected to a wir
eless LAN, select [No] and press
and proceed to "Step 3:
Conguring Settings for T
oner Replenishment Service."
Step 5: Conguring Settings for T
oner
Replenishment Service(P. 49)
● When connecting to a wired LAN, congure the wired LAN connection settings after exiting the Setup Guide.
Selecting Wired or Wireless LAN(P. 52)
2
Select the Wireless LAN connection type, and connect to the Wireless LAN.
➠ When the connection to the wir
eless LAN is completed, the Toner Replenishment Service confirmation
screen is displayed.
Setting Up
48