4
Access the wireless LAN router from a computer, and register the WPS PIN code to
the r
outer.
5
When [Connected.] appears on the operation panel, press
.
➠ When the machine is connected to the wir
eless LAN, [
] appears on the [Home] screen.
6
Wait a few minutes.
➠ W
ait a few minutes. By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses(P. 71)
Setting IPv6 Addresses(P. 75)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Press , and repeat the procedure starting from Step 2.
Setting Up
62
To Next Page
Loading...
