3
Enter the IPv4 address of a network device, and press [Apply].
➠ If the machine is corr
ectly connected to the network, [Received response from the host.] appears.
◼ 5 Lines LCD Model
Required Preparations
● Pr
epare the IPv4 address of a device in the network to which you want to connect and keep it close by.
1
On the operation panel, select [Menu] in the [Home] screen, and press . [Home]
Scr
een(P. 113)
2
Press [Preferences]
[Network] [TCP/IP Settings] [IPv4 Settings]
[PING Command] .
If the login screen appears, enter the System Manager ID and PIN, and then press . System Manager
ID and PIN(P. 5)
3
Enter the IPv4 address of a network device, and press .
➠ If the machine is corr
ectly connected to the network, [Received response from host.] appears.
Viewing the IP address set to the machine
Y
ou can view the setting of IP address set to the machine such as the IPv4 address and the IPv6 address.
This section describes how to view the IP address using the operation panel.
You can also check this information using Remote UI from a computer.
Managing the Machine from a Computer
(Remote UI)(P. 349)
Touch Panel Model(P. 90)
5 Lines LCD Model(P. 91)
◼ Touch Panel Model
1
Press on the operation panel.
➠ The [Status Monitor] scr
een is displayed.
2
Press [Network Information]
[IPv4] or [IPv6].
3
View the setting.
Setting Up
90
To Next Page
Loading...
