Advanced Guide
>
Printing from a Computer
>
Printing with Other Application Software
>
Various Printing
Methods
> Setting the Stapling Margin
P002
Setting the Stapling Margin
The procedure for setting the staple side and the margin width is as follows:
1.
Open the
printer driver setup window
2.
Specify the side to be stapled
Check the position of the stapling margin from Staple Side on the Page Setup tab.
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
staple position. When you want to change the setting, select from the list.
3.
Set the margin width
If necessary, click Specify Margin... and set the margin width, and then click OK.
Note
The printer automatically reduces the print area depending on the staple position margin.
Seite 276 von 922 SeitenSetting the Stapling Margin
To Next Page
Loading...
