Advanced Guide
>
Troubleshooting
> The Machine Cannot Be Powered On
U303
The Machine Cannot Be Powered On
Check 1: Press the
ON
button.
Check 2: Make sure that the power plug is securely plugged into the
Power Cord Connector of the machine, then turn it back on.
Check 3: Unplug the machine from the power supply, then plug the
machine back in and turn the machine back on after leaving it for at
least 3 minutes.
If the problem is not resolved, contact the service center.
Page top
Seite 800 von 922 Seiten
To Next Page
Loading...
