Canon MX360 Seires - Reducing the Machine Noise

Advanced Guide
>
Changing the Machine Settings
>
Changing Machine Settings from Your Computer
>
Reducing the Machine Noise
P034
Reducing the Machine Noise
This function allows you to reduce the operating noise. Select when you wish to reduce the operating
noise of the printer at night, etc.
Using this function may lower the print speed.
The procedure for using the quiet mode is as follows:
Quiet Mode
1.
Open the
printer driver setup window
2.
Click Quiet Mode on the Maintenance tab
The Quiet Mode dialog box opens.
3.
Set the quiet mode
If necessary, specify one of the following items:
Do not use quiet mode
The operating noise is at normal volume.
Always use quiet mode
Select this option when you wish to reduce the operating noise.
Use quiet mode within specified time
The operating noise can be reduced during a specified period of time.
Set the Start time and End time when you wish the quiet mode to be activated.
Important
The time specified in Start time and in End time must be different.
4.
Apply the settings
Make sure that the machine is on and click OK.
Click OK when the confirmation message appears.
The settings are enabled hereafter.
Note
Depending on print quality settings, effects of the quiet mode may be less.
Page top
Seite 796 von 922 SeitenReducing the Machine Noise