Canon MX360 Seires - Memory Reception

Advanced Guide
>
Faxing
>
Receiving Faxes
> Memory Reception
F021
Memory Reception
If the machine receives a fax under one of the following conditions, the received fax will not be printed
and will be stored it in machine's memory. The
FAX Memory
lamp is lit and Received in memory is
displayed on the LCD.
If the machine receives a fax under one of the following conditions, the received fax will be automatically
stored in machine's memory.
The machine is set to store received faxes in its memory:
When Do not print is selected for Received documents in Auto print settings under Fax settings, the
received faxes are stored in machine's memory.
You can print the faxes stored in machine's memory from the Memory reference screen under the
Fax settings screen.
Printing a Document in Machine's Memory
Note
To print the received faxes automatically, select Print for Received documents in Auto print
settings under Fax settings.
Auto print settings
An error has occurred on the machine:
If you select Print for Received documents in Auto print settings under Fax settings, a received fax
will be printed automatically. However, if any of the following errors occurs, the received fax will not
be printed. It will instead be stored in machine's memory.
When the error is resolved, the fax stored in machine's memory is printed automatically.
The amount of remaining ink is insufficient to print a fax:
Replace the FINE Cartridge.
Routine Maintenance
Note
You can set the machine to forcibly print a received fax even if the ink has run out.
However, part or all of the fax may not be printed since the ink has run out.
Also, the contents of the fax will not be stored in machine's memory.
If the ink has already run out, we recommend that Do not print be selected for Received
documents in Auto print settings under Fax settings to store the received fax in machine's
memory. After you replace the FINE Cartridge and select Print for Received documents in
Auto print settings, the fax stored in machine's memory will be printed automatically.
Auto print settings
Paper has run out:
Load the paper and press the
OK
button.
A different size of paper from that specified by Page size is loaded:
Load the same size of paper as that specified by Page size, then press the
OK
button.
Page size is set to other than A4, Letter, LTR, or Legal:
Set Page size to A4, Letter, LTR, or Legal.
Changing the Print Settings
Note
Some of page sizes are not available depending on the country or region of purchase.
Media type is set to other than Plain paper:
Set Media type to Plain paper.
Changing the Print Settings
You pressed the
Stop
button to cancel printing of a fax:
Press the
FAX
button to resume printing of the fax.
Seite 645 von 922 SeitenMemory Reception