Canon MX360 Seires - Transporting the Machine

Advanced Guide
>
Appendix
> Transporting the Machine
U510
Transporting the Machine
When relocating the machine, pack the machine using the original packing materials.
If you do not have the original packing materials, pack the machine carefully using protective material
and place it inside a sturdy box.
Important
Do not transport or store the machine slanted, vertically, or upside-down, as the ink may leak and
damage the machine.
1.
Turn the machine off.
2.
Confirm that the
POWER
lamp is off and unplug the machine.
Important
Do not unplug the machine while the
POWER
lamp is lit or flashing green, as it may cause
malfunction or damage to the machine, making the machine unable to print.
3.
Retract the Paper Support, then close the Paper Output Tray.
4.
Disconnect the printer cable from the computer and from the machine, then
disconnect the power plug from the machine.
5.
Use adhesive tape to secure all the covers on the machine to keep them from
opening during transportation. Then pack the machine in the plastic bag.
6.
Attach the protective material to the machine when packing the machine in the box.
Important
Pack the machine with the FINE Cartridges left installed in the machine.
Note
When you ask a shipping agent to transport the machine, clearly label the box as "FRAGILE" or
"HANDLE WITH CARE".
Page top
Seite 910 von 922 Seiten
Transporting the Machine