Advanced Guide
>
About Bluetooth Communication
>
Printing Data via Bluetooth Communication
>
Installing the MP Drivers
B007
Installing the MP Drivers
Note
If you use the printer connecting with a computer, the MP Drivers have already been installed. In this
case, move to the next step.
Checking the Device Name of the Printer
Before connecting the Bluetooth unit to the printer for wireless printing, first the USB cable must be
connected between the printer and computer, and the MP Drivers must be installed.
If you reinstall the MP Drivers, perform Custom Install on the
Setup CD-ROM, then select MP Drivers.
Page top
Seite 749 von 922 SeitenInstalling the MP Drivers
To Next Page
Loading...
