Advanced Guide
>
Maintenance
>
Cleaning Your Machine
> Cleaning the Platen Glass and Document
Cover
U061
Cleaning the Platen Glass and Document Cover
Important
Be sure to turn off the power and unplug the power cord before cleaning the machine.
The power cannot be turned off while the machine is sending or receiving a fax, or when the
received fax or unsent fax are stored in the machine's memory. Make sure if the machine
completed sending or receiving all the faxes before disconnecting the power cord.
The machine cannot send or receive faxes when the power is turned off.
If you unplug the power cord, all the documents stored in the machine's memory will be
deleted.
Print the necessary documents or save them to the USB flash drive before unplugging the
power cord.
With a clean, soft, lint-free cloth, wipe the Platen Glass (A), the inner side of the Document Cover (white
sheet) (B), the glass of the ADF (C), and the inner side of the ADF (white area) (D) gently. Be sure not to
leave any residue, especially on the Platen Glass.
Important
The inner side of the Document Cover (white sheet) (B) is easily damaged, so wipe it gently.
If any foreign substances such as glue, ink or correction fluid are adhered to the glass of the ADF
(C) as shown in the figure above, some black streaks will appear on the scanned image.
In this case, wipe the dirt off gently.
Page top
Seite 721 von 922 SeitenCleaning the Platen Glass and Document Cover
To Next Page
Loading...
