Canon MX360 Seires - Slow Scanning Speed

Advanced Guide
>
Troubleshooting
>
Problems with Scanning
> Slow Scanning Speed
S908
Slow Scanning Speed
Check 1: To view the image on a monitor, set the output resolution to
around 150 dpi. To print, set it to around 300 dpi.
Resolution
Check 2: Set Fading Correction, Grain Correction, etc. to None.
Image Settings
Check 3: In MP Navigator EX, deselect the Correct slanted document /
Detect the orientation of text documents and rotate images checkbox and
scan again.
Scan Settings Dialog Box (Photos/Documents)
Scan Settings Dialog Box (Stack of Documents (ADF))
Scan Settings Dialog Box (One-click Mode Screen)
Scan Settings Dialog Box (Scanner Button Settings)
Page top
Seite 863 von 922 SeitenSlow Scanning Speed