Advanced Guide
Troubleshooting
Contents
>
Faxing > Sending Faxes
C158
Sending Faxes
This section describes dialing and sending faxes directly using the Numeric buttons.
For details on other ways to send faxes, see
Using Various Sending Functions
.
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
Sending a Fax with the Numeric Buttons
Important
If you enter or register an incorrect fax/telephone number with the Numeric buttons, the fax will be
sent to an unexpected recipient. When sending an important fax, we recommend sending the fax
after confirming the recipient's condition.
For details, refer to "Sending a Fax after Speaking on Telephone" in the on-screen manual:
Originals to send. See Originals You Can Load
.
1.
Prepare for sending a fax.
(1)
Make sure that the power is turned on.
See
Operation Panel
.
(2)
Press the
FAX
button.
The fax standby screen will appear.
(3)
Load the original in the ADF or on the Platen Glass.
See
Loading Originals.
Important
When sending a double-sided document, load the document on the Platen Glass. Double-
sided documents cannot be automatically scanned and sent from the ADF.
Note
For details on the types and conditions of document which you can fax, see
Loading
Originals
.
Seite 32 von 922 SeitenSending Faxes
To Next Page
Loading...
