Canon MX360 Seires - Changing Registered Information

Advanced Guide
>
Faxing
>
Registering Recipients for Speed Dialing
>
Registering Recipients Using the
Operation Panel of the Machine
> Changing Registered Information
F006
Changing Registered Information
To change information registered for coded speed dial and group dial, follow the procedure below.
1.
Make sure that the machine is turned on.
2.
Press the
FAX
button.
The Fax standby screen is displayed.
3.
Press the
Menu
button.
The Fax settings screen is displayed.
4.
Use the button to select TEL no. registration, then press the
OK
button.
5.
Use the
button to select a registration menu to change, then press the
OK
button.
6.
Change the registered information.
To change a coded speed dial code:
1.
Use the
button or the Numeric buttons to select a coded speed dial code to
change, then press the
OK
button.
2.
Display the screen to enter the recipient's fax/telephone number as well as you register
the fax/telephone number to the coded speed dial.
For MX410 series, for details on how to display the screen to enter the recipient's fax/
telephone number and register the number, see step 7 to 8 in
Registering to MX410
series
.
For MX360 series, for details on how to display the screen to enter the recipient's fax/
telephone number and register the number, see step 7 to 9 in
Registering to MX360
series
.
3.
Change the recipient's fax/telephone number, then press the
OK
button.
Note
You can enter the fax/telephone number up to 60 digits (40 digits for the US,
Canada, and Korea), including spaces.
For details on how to enter or delete characters or numbers, refer to Preparing for
Faxing
.
Press the
Redial/Pause button to enter a pause.
When Telephone line type in FAX user settings under Fax settings is set to Rotary
pulse, you can enter a tone ("T") by pressing the
Tone
button.
4.
Display the screen to enter the recipient's name as well as you register the name to the
coded speed dial.
For MX410 series, for details on how to display the screen to enter the recipient's name
and register the name, see step 9 to 10 in Registering to MX410 series
.
For MX360 series, for details on how to display the screen to enter the recipient's name
and register the name, see step 10 to 11 in Registering to MX360 series
.
5.
Change the recipient's name, then press the
OK
button.
Note
You can enter the name up to 16 characters, including spaces.
For details on how to enter or delete characters, refer to Preparing for Faxing
.
To change a group dial code:
1.
Use the
button or the Numeric buttons to select a group dial code to change, then
Seite 659 von 922 SeitenChanging Registered Information