To return to the screen to select the coded speed dial code or the group dial code, press
the button.
3.
Press the
OK
button.
The coded speed dial code is registered to the group dial.
4.
Press the
Coded Dial
button to display the screen to select a coded speed dial code, then add
another member.
Repeat this step to register the other coded speed dial codes to the same group dial.
Note
You can check the coded speed dial code and the recipient's name registered to the group dial
by using the
button.
To delete the registered coded speed dial code from the group dial, press the
Tone
button.
8.
Press the
OK
button after finishing registering the member you want to register to
the group dial.
The screen to enter the group name is displayed.
9.
Use the Numeric buttons to enter the group name.
Note
You can enter the name up to 16 characters, including spaces.
For details on how to enter or delete characters, refer to Preparing for Faxing
.
10.
Press the
OK
button to finalize registration.
Note
To register another group dial code to the machine, repeat steps 6 to 10.
To return to the Fax standby screen, press the
Stop
button.
You can check the recipients you have registered to the group dial by printing the list of the
group dial codes.
Printing a List of the Registered Destinations
Page top
Seite 658 von 922 SeitenRegistering Recipients for Group Dial
To Next Page
Loading...
