- If the machine does not detect the fax ring pattern, the telephone will continue ringing.
Note
Available advanced settings for DRPD or Network switch
*2
DRPD: Fax ring pat.: Select a ring pattern assigned to the fax number (for DRPD).
Ring count in Incoming ring: Change the number of times to ring the telephone.
When not receiving voice calls:
When receiving a fax only:
Fax only mode
When a fax incomes, the machine will receive the fax automatically.
Note
Available advanced settings for Fax only mode
*2
Ring count in Incoming ring: Change the number of times to ring the telephone.
*1
The telephone may not ring when a call incomes even if it is connected to the machine,
depending on the type or settings of the telephone.
*2
The settings can be changed with the advanced settings options that become available after
selecting a receive mode.
For details, refer to the on-screen manual:
Advanced Guide
.
Page top
Seite 30 von 922 SeitenSetting the Receive Mode
To Next Page
Loading...
