Canon MX360 Seires - Page 641

Advanced Guide
>
Faxing
>
Receiving Faxes
> Advanced Settings of Receive Mode
F041
Advanced Settings of Receive Mode
You can specify the advanced settings of each receive mode.
This section describes the procedure to specify the advanced settings of the receive mode and the
setting items.
Specify the advanced settings following the procedure below.
1.
Make sure that the machine is turned on.
2.
Press the
FAX
button.
The Fax standby screen is displayed.
3.
Press the
Menu
button.
The Fax settings screen is displayed.
4.
Use the
button to select Receive mode set., then press the
OK
button.
5.
Use the
button to select a receive mode, then press the
OK
button.
The confirmation screen for specifying the advanced setting is displayed.
6.
Use the
button to select Yes, then press the
OK
button.
7.
Use the
button to select a setting item, then press the
OK
button.
8.
Use the
button to specify the setting, then press the
OK
button.
Depending on the setting items, the related setting items are displayed after you specify the setting
of the advanced settings and press the
OK
button. Use the button again to specify the setting,
then press the
OK
button. The LCD returns to the Fax standby screen after you finish specifying all
settings.
Note
The * (asterisk) on the LCD indicates the current setting.
For details on advanced settings of each receive mode, see below.
Advanced setting in TEL priority mode
Advanced setting in Fax only mode
Advanced setting in DRPD
Advanced setting in Network switch
Note
Refer to
Faxing
for information on receiving faxes or the procedure for each receive mode.
DRPD is available only in the US and Canada.
Network switch may not be available depending on the country or region of purchase.
Advanced setting in TEL priority mode
You can specify the following setting items.
Manual/auto switch
If you select ON, the machine automatically receives faxes after the external device rang a
specified length of time.
You can specify the length of time until automatic reception is started.
User-friendly RX
If you select ON, the machine automatically switches from telephone calling to fax
Seite 641 von 922 SeitenAdvanced Settings of Receive Mode