*2 Can be selected only on certain Canon-brand PictBridge compliant devices. (May
not be selected depending on the device.)
Trimming
Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from PictBridge settings. Set the print settings to
Default on the PictBridge compliant device when you want to print according to the settings on the
machine.
This section describes the procedure to display PictBridge settings. For setting items, see
PictBridge settings
.
1.
Make sure that the machine is turned on.
2.
Press the
Menu
button repeatedly until Device settings appears.
3.
Use the button to select PictBridge settings, then press the
OK button.
The setting item of PictBridge printing is displayed.
Page top
Seite 712 von 922 SeitenAbout PictBridge Print Settings
To Next Page