Canon MX360 Seires - Page 773

computer
"TBPnnn (Canon XXX Printer (Copy X))" ("n" is a digit)
For Windows Vista or Windows XP
When authenticating the printer as a Bluetooth device in Control Panel
"BTHnnn (Canon XXX Printer (Copy X))" ("n" is a digit).
When authenticating the printer as a Bluetooth device using Bluetooth Settings built in the
computer
"TBPnnn (Canon XXX Printer (Copy X))" ("n" is a digit)
6.
Click OK.
Check 4: Is the message "This document failed to print" displayed?
Do not retry printing. Check the error message on the LCD.
Clear the error according to An Error Message Is Displayed on the LCD
.
When you use a Microsoft Bluetooth driver, make sure that the Printing (HCRP) service is
effective on your computer.
In Windows 7:
Click Control Panel. Select Devices and Printers under Hardware and Sound, then select the
printer to be used for Bluetooth communication. Right-click and select Properties.
Make sure that Printing (HCRP) on the Services sheet is checked.
In Windows Vista:
Click Control Panel, Bluetooth Devices under Hardware and Sound, then select the printer to be
used for Bluetooth communication and click Properties.
Make sure that Printing (HCRP) on the Services sheet is checked.
In Windows XP:
Click Control Panel, Bluetooth Devices under Printers and Other Hardware, then select the
printer to be used for Bluetooth communication and click Properties.
Make sure that Printing (HCRP) on the Services sheet is checked.
If Printing (HCRP) is not checked or the Printing (HCRP) service is not detected, follow the
procedure below and register the printer again.
1.
Select items from Control Panel as shown below.
In Windows 7, click Control Panel, then Devices and Printers under Hardware and
Sound.
In Windows Vista, Control Panel, then Printers under Hardware and Sound.
In Windows XP, click Control Panel, then Printers and Faxes under Printers and Other
Hardware.
2.
Click the
icon of the printer for printing via Bluetooth communication.
3.
Remove the printer following the procedure below.
In Windows 7, select Remove device.
In Windows Vista, select Delete from the Organize menu.
In Windows XP, select Delete from the File menu.
4.
Authenticate the printer as a Bluetooth device from Control Panel as shown
below.
In Windows 7, authenticate the printer as a Bluetooth device on Add a Bluetooth Device in
Hardware and Sound under Control Panel.
In Windows Vista or Windows XP, authenticate the printer as a Bluetooth device on
Bluetooth Devices, in Control Panel.
For more information about the procedure, see
Registering the Printer
.
This message is displayed when the print job is sent from the Bluetooth device while another
print job through the USB port is being printed out.
Printing will begin automatically when the print queue is finished.
Printing cannot be carried out with Bluetooth communication from more than one computer at
the same time. In this case, this message is displayed on the computer during standing by.
Printing will begin automatically when the print queue is finished.
Check 5: Were the MP Drivers installed after printer registration on Add
a Bluetooth Device (Bluetooth Devices in Windows Vista or Windows
Seite 773 von 922 SeitenPrinting Does Not Start