Canon MX360 Seires - Page 781

RX start speed
Selects the fax reception speed.
Ex:
The following settings are available.
33600 bps/14400 bps/9600 bps/4800 bps
The * (asterisk) on the LCD indicates the current setting.
33600 bps is the maximum reception speed. When the telephone line condition or
connection is poor, selecting a lower reception speed may solve reception problems.
Auto print settings
Received documents
Selects whether to print the received fax automatically when receiving a fax.
If you select Do not print, the received is stored in machine's memory.
Document Stored in Machine's Memory
Activity report
Selects whether to print the Activity report automatically.
If you select Print, the machine prints the report for the 20 histories of sent and received faxes
automatically.
For details on the procedure to print the Activity report manually, see Summary of Reports and
Lists
.
TX report
Selects whether to print the TX report automatically after sending a fax.
If you print the TX report, select Print error only or Print for each TX.
If you select Print error only or Print for each TX, you can specify the print setting that the first
page of the fax is printed along with the report.
RX report
Selects whether to print the RX report automatically after receiving a fax.
If you print the RX report, select Print error only or Print for each RX.
Print when out of ink
Sets whether to continue printing the received fax without storing it in machine's memory
when the ink has run out.
However, part or all of the fax may not be printed since the ink has run out.
Auto save setting (MX410 series)
Selects whether to save the received fax on the USB flash drive automatically after receiving a fax.
Saving Received Faxes Automatically on a USB Flash Drive (MX410 series)
Security control
Fax number re-entry
If you select ON, you can set the machine to send faxes after using the Numeric buttons to dial
the number twice. By using this setting, you can avoid the mistransmission of faxes.
Check RX fax info
If you select ON, the machine checks whether the recipient's fax machine information
matches the dialed number. If it matches the number, the machine starts to send faxes.
Hook key setting
If you select Enable, you can use the
Hook
button.
Fax reception reject
Seite 781 von 922 SeitenFax settings