Advanced Guide
>
Troubleshooting
>
MP Navigator EX Problems
> Position or Size of the Image Cannot
be Detected Correctly When Scanning Using the Operation Panel
S942
Position or Size of the Image Cannot be Detected Correctly
When Scanning Using the Operation Panel
Check 1: Make sure that the documents are placed correctly on the Platen.
Placing Documents
Check 2: Check that the settings are correctly set according to the
document.
If you cannot scan properly by automatically detecting the document type, specify the document type and
size.
When Scanning Using the Operation Panel
Setting Items on the Operation Panel of the Machine
When Scanning Using MP Navigator EX
Scanning Photos and Documents
Page top
Seite 874 von 922 SeitenPosition or Size of the Image Cannot be Detected Correctly When Scann...
To Next Page
Loading...
