D-Link xStack DGS-3420 Series - Page 1102

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1097
unitID: Represents the ID of the device in the stacking system.
portNum: Represents the logical port number of the MEP.
mepdirection:
Represents the MEP direction, which can be "inward" or
"outward".
CFM
Extension
Event description: AIS condition detected
Log Message: [CFM_EXT(1):]AIS condition detected. MD
Level:<mdlevel>, VLAN:<vlanid>, Local(Port <[unitID:]portNum>,
Direction:<mepdirection>, MEPID:<mepid>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
unitID: Represents the ID of the device in the stacking system.
portNum: Represents the logical port number of the MEP.
mepdirection: Represents the direction of the MEP. This can be
"inward" or "outward".
mepid: Represents the MEPID of the MEP.
Notice
Event description: AIS condition cleared
Log Message: [CFM_EXT(2):]AIS condition cleared. MD
Level:<mdlevel>, VLAN:<vlanid>, Local(Port <[unitID:]portNum>,
Direction:<mepdirection>, MEPID:<mepid>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
unitID: Represents the ID of the device in the stacking system.
portNum: Represents the logical port number of the MEP.
mepdirection: Represents the direction of the MEP. This can be
"inward" or "outward".
mepid: Represents the MEPID of the MEP.
Notice
Event description: LCK condition detected
Log Message: [CFM_EXT(3):]LCK condition detected. MD
Level:<mdlevel>, VLAN:<vlanid>, Local(Port <[unitID:]portNum>,
Direction:<mepdirection>, MEPID:<mepid>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
unitID: Represents the ID of the device in the stacking system.
portNum: Represents the logical port number of the MEP.
mepdirection: Represents the direction of the MEP. This can be
"inward" or "outward".
mepid: Represents the MEPID of the MEP.
Notice
Event description: LCK condition cleared
Log Message: [CFM_EXT(4):]LCK condition cleared. MD
Level:<mdlevel>, VLAN:<vlanid>, Local(Port <[unitID:]portNum>,
Direction:<mepdirection>, MEPID:<mepid>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
Notice