D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
118
Example
To display current time range setting:
DGS-3420-28SC:admin#show time_range
Command: show time_range
Time Range Information
-------------------------
Range Name : testdaily
Weekdays : Mon,Fri
Start Time : 12:00:00
End Time : 13:00:00
Total Entries :1
DGS-3420-28SC:admin#
5-7 show current_config access_profile
Description
This command is used to display the ACL part of the current configuration, when logged in with user
level privileges. The overall current configuration can be displayed by using the show config command,
which is accessible with administrator level privileges.
Format
show current_config access_profile
Parameters
None.
Restrictions
None.
Example
To display the ACL part of the current configuration:
DGS-3420-28SC:admin#show current_config access_profile
Command: show current_config access_profile
#-----------------------------------------------------------------------------
# ACL
create access_profile Ethernet vlan profile_id 1
config access_profile profile_id 1 add access_id 1 ethernet vlan default port 1

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English