D-Link xStack DGS-3420 Series - Page 124

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
119
permit
create access_profile ip source_ip_mask 255.255.255 profile_id 2
config access_profile profile_id 2 add access_id 1 ip source_ip 10.10.10.10
port 2 deny
#------------------------------------------------------------------------------
DGS-3420-28SC:admin#
5-8 delete cpu access_profile
Description
This command is used to delete CPU access list profiles.
Format
delete cpu access_profile [profile_id <value 1-5> | all]
Parameters
profile_id - Specify the index of the access list profile.
<value 1-5> - Specify the value between 1 and 5.
all - Specify to delete all the access list profiles.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete access list rules:
DGS-3420-28SC:admin#delete cpu access_profile profile_id 3
Command: delete cpu access_profile profile_id 3
Success.
DGS-3420-28SC:admin#
5-9 create cpu access_profile profile_id
Description
This command is used to create CPU access list profiles.