D-Link xStack DGS-3420 Series - Page 126

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
121
src_port_mask - (Optional) Specify the UDP source port mask.
<hex 0x0-0xffff> - Specify the UDP source port mask.
dst_port_mask - (Optional) Specify the UDP destination port mask.
<hex 0x0-0xffff> - Specify the UDP destination port mask.
protocol_id_mask - Specify that the rule applies to the IP protocol ID traffic.
<hex 0x0-0xff> - Specify that the rule applies to the IP protocol ID traffic.
user_define_mask - (Optional) Specify the L4 part mask
<hex 0x0-0xffffffff> - Specify the L4 part mask
packet_content_mask - Specify the packet content mask.
offset_0-15 - Specify the mask for packet bytes 0-15.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 0-3.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 4-7.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 8-11.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 12-15.
offset_16-31 - Specify the mask for packet bytes 16-31.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 16-19.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 20-23.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 24-27.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 28-31.
offset_32-47 - Specify the mask for packet bytes 32-47
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 32-35.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 36-39.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 40-43.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 44-47.
offset_48-63 - Specify the mask for packet bytes 48-63.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 48-51.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 52-55.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 56-59.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 60-63.
offset_64-79 - Specify the mask for packet bytes 64-79.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 64-67.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 68-71.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 72-75.
<hex 0x0-0xffffffff> - Specify the mask for packet bytes 76-79.
ipv6 - Specify the IPv6 mask.
class - Specify the IPv6 class mask.
flowlabel - Specify the IPv6 flow label mask.
source_ipv6_mask - Specify the IPv6 source IP mask.
<ipv6mask> - Specify the IPv6 source IP mask.
destination_ipv6_mask - Specify the IPv6 destination IP mask.
<ipv6mask> - Specify the IPv6 destination IP mask.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create CPU access list profiles:
DGS-3420-28SC:admin#create cpu access_profile profile_id 1 ethernet vlan
Command: create cpu access_profile profile_id 1 ethernet vlan
Success.